Day and Night Art
Rental list
- Contact us at dayandnight.art
- $5M liability insurance on every piece, with your organization and/or venue named as additional insured.
- Price is quoted per event.

Orcar
by Aaron Rosenberg
A 24 ft illuminated orca on a 20 ft truck chassis. Twenty people ride inside the belly of the whale while 7,000 LEDs trace its ribs. Carries a Southern Resident orca message.
- Price
- quoted per event
- Engineering
- Structural engineer reviewed (not a P.Eng)Reviewed by a structural engineer (not a P.Eng). No P.Eng stamp. A written safety plan comes with every booking.
- Storage
- Lives on its chassis in SquamishMulti-day and multi-week placements welcome.
- Container fit
- Self-propelled (drives to site)
- Ground transport
- Drives itself to your siteHighway-legal truck based in Squamish, BC. Transport within BC included; farther afield quoted per event.
- Home base
- Squamish, BC
- Crew & install
- On site and running in 1-3 hoursMoving it takes 1 operator and 2 spotters. Parked, it runs unattended; a crew member manages the belly door during open hours.
- Machinery
- None for drive-in placement. / Crane only if you want it set on the ground off the chassis (quoted separately).
- Power
- Self-powered, no generator12V battery bank drives ~1 kW of LED. A 2-hour daytime charge runs 12 hours of night lighting.

Daisy
by Sam Carter
The world's largest solar-powered tricycle, with massive spoked wheels and a carriage that can carry a whole classroom of children, cruising all day and night on solar and battery power.
- Price
- quoted per event
- Engineering
- Structural engineer reviewed (not a P.Eng)Reviewed by a structural engineer. / No P.Eng stamp.
- Storage
- Covered storage about 10 x 20 ft. / Panels fold for travel.
- Container fit
- Flatbed only
- Ground transport
- Flatbed trailer. / Quoted per event from its home base.
- Home base
- Vancouver, BC
- Crew & install
- Carriage carries a whole classroom of children, plus the driver. / Sam drives; one helper on site. Ready in under an hour.
- Machinery
- None on site. / Rides on and off its trailer by ramp.
- Power
- Solar-powered, no generatorSolar array plus an on-board battery bank, so she runs day and night.

Prosthesis
by Jonathan Tippett
A 4-tonne, 13 ft, four-legged exoskeleton racing mech, piloted from the inside by a human with no autonomy. Guinness World Record holder for the largest tetrapod exoskeleton.
- Price
- quoted per event
- Engineering
- P.Eng stampedP.Eng stamped. / Designed and built by mechanical engineer Jonathan Tippett; in field trials since 2017.
- Storage
- Stored indoors in its Squamish workshop. / Needs a covered space about 20 x 20 ft between events.
- Container fit
- Flatbed only
- Ground transport
- Heavy-haul trailer from SquamishQuoted per event.
- Home base
- Squamish, BC
- Crew & install
- Arrives with its own pilot and crewPiloted by Jonathan Tippett, its designer and builder.
- Machinery
- Lowbed trailer and a forklift or telehandler for unloading. / The crew supplies its own charging gear; you supply a 208V or 240V 50A drop for overnight charging.
- Power
- Fully electric, 36 kWh battery96V lithium-ion pack driving two AC motors and hydraulic pumps, up to 150 kW (200 hp) peak. 15-60 minutes of operation per charge; charging agreed per event.

Spider 2
by Sam Carter
A 1,500 lb all-electric walking machine you ride, built in Vancouver by the Mondo Spider's makers. It debuted on stage at Coachella in 2024.
- Price
- quoted per event
- Engineering
- Not engineer reviewed
- Storage
- on request
- Container fit
- on request
- Ground transport
- Quoted per event from Los Angeles.
- Home base
- Los Angeles, CA
- Crew & install
- Piloted by its builders.
- Machinery
- on request
- Power
- All-electric, no generator5 kWh LiPo battery, about 3 hours of drive time. Fast charging available.

Deferent Circles
by Bryce Larkin
Two painted steel wheels that spin each other on a low platform under a ribbed white canopy: a lounge spot that glows at night.
- Price
- quoted per event
- Engineering
- Not engineer reviewed
- Storage
- on request
- Container fit
- Fits a 20 ft container
- Ground transport
- Quoted per event.
- Home base
- on request
- Crew & install
- The artist sets it up and comes along to run it.
- Machinery
- on request
- Power
- Small LED lightsPower needs confirmed per event.

Subterra Diamonds
by Love & Light Productions
Diamond-shaped lightboxes with laser-cut inner frames that mount above and around a DJ booth, glowing in any colour.
- Price
- quoted per event
- Engineering
- Not engineer reviewed
- Storage
- Flat diamond lightboxes, about 4 x 2.5 ft x 6 in each, plus the timber frame.
- Container fit
- Fits a 20 ft container
- Ground transport
- Quoted per event.
- Home base
- Victoria, BC
- Crew & install
- The artists set it upLove & Light Productions handles setup and can bring their own lighting control.
- Machinery
- None. / Hand tools only.
- Power
- LED backlighting, wired for DMXConnects to your lighting system, or the artists bring their own controllers.

Panel Boxes
by Love & Light Productions
Tall, slim lightboxes with laser-cut geometric faces that glow from inside. Stand them either side of a DJ booth or line them along a wall.
- Price
- quoted per event
- Engineering
- Not engineer reviewed
- Storage
- Two flat boxes, each about 6 x 1.5 ft x 8 in.
- Container fit
- Fits a 20 ft container
- Ground transport
- Quoted per event.
- Home base
- Victoria, BC
- Crew & install
- The artists set it upLove & Light Productions handles setup and can bring their own lighting control.
- Machinery
- None. / Hand tools only.
- Power
- LED backlighting, wired for DMXConnects to your lighting system, or the artists bring their own controllers.

Subterra Booth
by Love & Light Productions
A timber DJ booth with a front of wood slats laid in chevrons around a backlit diamond.
- Price
- quoted per event
- Engineering
- Not engineer reviewed
- Storage
- Breaks down into the chevron front and booth frame.
- Container fit
- Fits a 20 ft container
- Ground transport
- Quoted per event.
- Home base
- Victoria, BC
- Crew & install
- The artists set it upLove & Light Productions handles setup and can bring their own lighting control.
- Machinery
- None. / Hand tools only.
- Power
- LED backlighting, wired for DMXConnects to your lighting system, or the artists bring their own controllers.

Array
by Love & Light Productions
Freestanding lightbox pillars with laser-cut circuit patterns and a glowing hexagon cap. Place them at an entrance, around a dance floor or along a path.
- Price
- quoted per event
- Engineering
- Not engineer reviewed
- Storage
- Each pillar lies flat, about 7.5 x 1.5 x 1.5 ft, plus its base.
- Container fit
- Fits a 20 ft container
- Ground transport
- Quoted per event.
- Home base
- Victoria, BC
- Crew & install
- The artists set it upLove & Light Productions handles setup and can bring their own lighting control.
- Machinery
- None. / Hand tools only.
- Power
- LED backlighting, wired for DMXConnects to your lighting system, or the artists bring their own controllers.

Trigon
by Love & Light Productions
One large triangular lightbox with a laser-cut face of rays that pull toward the centre. Hang it over a stage or mount it on a wall.
- Price
- quoted per event
- Engineering
- Not engineer reviewed
- Storage
- One flat triangle, about 5 x 4.5 ft x 6 in.
- Container fit
- Fits a 20 ft container
- Ground transport
- Quoted per event.
- Home base
- Victoria, BC
- Crew & install
- The artists set it upLove & Light Productions handles setup and can bring their own lighting control.
- Machinery
- None. / Hand tools only.
- Power
- LED backlighting, wired for DMXConnects to your lighting system, or the artists bring their own controllers.

Chrysalis
by Love & Light Productions
A DJ booth front shaped like a moth's face, with two glowing eyes: one laser-cut lightbox, angled at the centre, that changes colour with your lighting.
- Price
- quoted per event
- Engineering
- Not engineer reviewed
- Storage
- Breaks down into two wing panels and a counter. / Packs into a cargo van.
- Container fit
- Fits a 20 ft container
- Ground transport
- Quoted per event.
- Home base
- Victoria, BC
- Crew & install
- The artists set it upLove & Light Productions handles setup and can bring their own lighting control.
- Machinery
- None. / Hand tools only.
- Power
- LED backlighting, wired for DMXConnects to your lighting system, or the artists bring their own controllers.

Puffy Portal
by Madeleine Chaffee
A glowing fabric portal with a stained-glass pattern, lit from within. Walk through it, lounge under it, or gather around it. Made from recycled materials.
- Price
- quoted per event
- Engineering
- Not engineer reviewed
- Storage
- Packs into four bins. / About 4 x 4 x 4 ft total.
- Container fit
- Fits a 20 ft container
- Ground transport
- Packs down compactly. Easy to transport.
- Home base
- Victoria, BC
- Crew & install
- 2 people, ~2 hours. / Teardown takes about an hour.
- Machinery
- None. / Hand tools only.
- Power
- AC power required

Trigon Tables
by Love & Light Productions
Three triangular lightboxes with laser-cut starburst faces, set on legs as tables. They also line up into a stage front or mount on a wall.
- Price
- quoted per event
- Engineering
- Not engineer reviewed
- Storage
- Stack flat, about 4 x 3.5 x 2 ft.
- Container fit
- Fits a 20 ft container
- Ground transport
- Fits a cube van. / Quoted per event.
- Home base
- Victoria, BC
- Crew & install
- The artists set it upLove & Light Productions handles setup and can bring their own lighting control.
- Machinery
- None. / Hand tools only.
- Power
- DMX-wired LED lightingConnects to your lighting system, or the artists bring their own controllers.

The Observer
by Love & Light Productions
A full DJ stage front of laser-cut wooden lightboxes: a central booth with a lotus and an all-seeing eye, with hexagon-cube and spiral wings either side.
- Price
- quoted per event
- Engineering
- Not engineer reviewed
- Storage
- Breaks down into panels and lightboxes. / Packs into a cube van.
- Container fit
- Fits a 20 ft container
- Ground transport
- Fits a cube van. / Quoted per event.
- Home base
- Victoria, BC
- Crew & install
- The artists set it upLove & Light Productions handles setup and can bring their own lighting control.
- Machinery
- None. / Hand tools only.
- Power
- DMX-wired LED backlightingFive independently controlled light sections. Connects to your lighting system, or the artists bring their own controllers.

Mondo Spider
by Jonathan Tippett
An eight-legged, 1,600 lb walking machine you ride. Steel legs step in a Klann linkage at a brisk walk, and since 2010 it has run silently on batteries.
- Price
- quoted per event
- Engineering
- P.Eng stampedP.Eng stamped.
- Storage
- Stored indoors in Los Angeles. / About 8 x 8 ft footprint.
- Container fit
- Fits a 20 ft container
- Ground transport
- Enclosed trailer from Los Angeles. / Quoted per event.
- Home base
- Los Angeles, CA
- Crew & install
- Carries one riderPiloted by its builders.
- Machinery
- Ramp-equipped trailer; no crane. / A 120V outlet for charging between rides.
- Power
- Battery-electric, no generator48V lithium iron phosphate pack (160 Ah). Range of about 14 km per charge.

HeART Pod
by Tif!
An anatomical heart of salvaged steel, mesh and glowing filament that floats at eye level. Press the stethoscope to your chest and it beats with your heartbeat.
- Price
- quoted per event
- Engineering
- Not engineer reviewed
- Storage
- Crated, about 5 x 5 x 6 ft.
- Container fit
- Fits a 20 ft container
- Ground transport
- Fits a cube van. / Quoted per event.
- Home base
- Squamish, BC
- Crew & install
- Small crew, under an hour
- Machinery
- None for the stand. / A lift or rigging crew if you hang it.
- Power
- Low-voltage LED, battery or 120VAddressable LED on its own Pixelblaze/Teensy controller.

Arch
by Aaron Rosenberg
An illuminated arch on a raised platform: two paths rise from either side, unite at the top and climb together toward infinity. Step up, take someone's hand and say it out loud.
- Price
- quoted per event
- Engineering
- Not engineer reviewedSingle-level and self-supporting. No suspended elements. Not P.Eng-stamped. Staked or ballasted to the site's wind exposure.
- Storage
- Stacks into a 4 x 8 ft footprint
- Container fit
- Fits a 20 ft container
- Ground transport
- Utility trailer or cube vanModular sections. We deliver within BC, or you can collect.
- Home base
- Squamish, BC
- Crew & install
- 2-3 people, ~3 hoursHand tools only, no machinery. Teardown takes ~90 minutes.
- Machinery
- None. / Hand tools only.
- Power
- Under 500W on one 120V circuitLED in the ribs and platform edge. Add ~1 kW if you want our ceremony sound system (two 500W PA speakers and a mic).

Noodle Box
by Aaron Rosenberg
A giant take-out noodle box you walk into. Step through a curtain of glowing noodles and pose for the crowd outside.
- Price
- quoted per event
- Engineering
- Not engineer reviewedGround-level and self-supporting. No overhead or load-bearing upper elements. Not P.Eng-stamped. Staked for wind with 12-inch steel stakes and foam caps.
- Storage
- Flat-packs to 4 x 8 x 2 ftBreaks down to a stack of 4 x 8 ft panels.
- Container fit
- Fits a 20 ft container
- Ground transport
- Fits a cargo van or pickupFlat-packs. We deliver within BC, or you can collect.
- Home base
- Squamish, BC
- Crew & install
- 2 people, ~2 hoursHand tools only, no machinery. Teardown takes under an hour.
- Machinery
- None. / Hand tools only.
- Power
- Under 500W on one 120V circuitBlacklight, RGB floods, fairy lights and LED lid washes, all off one extension from your power drop.